CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

CFX-5 on NT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 3, 2001, 02:46
Default CFX-5 on NT
  #1
Constantinos
Guest
 
Posts: n/a
Hellow

I was wondering to ask if any of you knows if CFX-5 can operate also on windows 2000 profesional edition (service pack 1) again using exceed 6.2 and exceed3D 6.2.

Thanks in advance

Constantinos
  Reply With Quote

Old   October 3, 2001, 12:23
Default Re: CFX-5 on NT
  #2
Robin Steed
Guest
 
Posts: n/a
Hi Constantinos,

CFX-5.4.1 is not officially supported on Win2K, but you should be able to run it without difficulty. You will need Exceed 6.2 or 7.0 for Build, but the other components do not need it. The only issue you may find is that you have to remove the quotes around the Exceed reference in you PATH environment variable.

CFX-5.5 will be supported on Win2K and no longer needs Exceed.

Robin
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Proper way to name boundaries on 2D model for use in CFX? RossFS ANSYS Meshing & Geometry 4 November 10, 2011 03:38
Pros and Cons for CFX, CFdesign, COMSOL Val Main CFD Forum 3 June 10, 2011 02:20
CFX pressure in Simulations problem nasdak CFX 1 April 14, 2010 13:22
PhD using CFX Rui CFX 9 May 28, 2007 05:59
CFX 4.4 installation problem Pandu Sattvika CFX 1 December 1, 2001 05:07


All times are GMT -4. The time now is 15:53.