CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

yplus

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 28, 2002, 11:58
Default yplus
  #1
Mohaba
Guest
 
Posts: n/a
hey all

I am modelling air flow with inlet and outlet using standard K-epsilon turbulence model. And got a yplus of 10E8 at a edge of the inlet for steady state simulation. Litrature suggest to be between 30 and 300. What sould I do, to improve it?

thanks

Moh
  Reply With Quote

Old   February 28, 2002, 15:29
Default Re: yplus
  #2
steve
Guest
 
Posts: n/a
Yplus should only be available at wall neighbouring cells, so I assume that the inlet intersects with a wall.

In this case the inlet profile would have a big impact on the boundary yplus value since yplus is proportional to wall shear. Try specifying a smooth profile for the velocities at the inlet in order to avoid large wall shear. (I'm guessing that at the moment the velocity is constant across the inlet and then drops to zero at the wall)

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to calculate Y+( Yplus) mohammad Main CFD Forum 3 January 12, 2011 00:23
which yplus (SST) sanchezz CFX 17 January 11, 2010 05:45
Who stole my Yplus? Chebeba CFX 4 March 23, 2006 05:18
X-Y plot of Yplus in Fluent 5.3 Luo FLUENT 24 April 11, 2000 06:07
heat transfer coefficients with "bad" yplus Andrew Main CFD Forum 4 April 8, 1999 04:43


All times are GMT -4. The time now is 02:49.