CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Specifying Roughness in CFX4

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 11, 2002, 17:23
Default Specifying Roughness in CFX4
  #1
Prashant Valluri
Guest
 
Posts: n/a
in CFX-4.4/4.3, is it possible to change the roughness of the wall (for the case of laminar flows)?

cheers prash

prashantvalluri@yahoo.com
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting of Roughness Constant and Height Sing FLUENT 5 August 25, 2015 18:08
nutRoughWallFunction and Surface Roughness Documented AlanR OpenFOAM Programming & Development 48 July 31, 2015 02:47
Laminar flow and wall roughness junbbung FLUENT 1 December 2, 2012 06:57
NACA standart roughness DAK565656 Main CFD Forum 2 August 24, 2005 00:47
Roughness adaptation in CFX 4.4 Bart CFX 1 May 2, 2003 08:32


All times are GMT -4. The time now is 01:02.