CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

ICEM tetra

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 2, 2003, 09:18
Default ICEM tetra
  #1
Ben
Guest
 
Posts: n/a
hi!

i am generating a mesh of a pump by using ICEM tetra. because of the rotational periodic geometry i only want to simulate a segment of the whole pump. now my problem is to generate the mesh at the interface between the rotating and the stationary domain. either i get a mesh which hasn`t periodic faces or i get a mesh with periodic faces but the surfacemesh on the interface hasn`t the needed shape (have a look at the following pdf- file: ftp://ftp.hta.fhz.ch/tmp/CFD/periodic.pdf ) can anybody help me to fix this problem or does anybody know a tutorial database where i can download some examples.

thanks in advance

ben
  Reply With Quote

Old   November 12, 2003, 19:24
Default Re: ICEM tetra
  #2
derrek
Guest
 
Posts: n/a
Ben:

Are you specifying the periodicity? (Geometry->Mesh params->Model->Define periodicity)

Hope this helps..

Derrek
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Exporting ICEM Tetra Grid to Fluent with Hexa-Core Tim FLUENT 2 August 30, 2007 07:16
Icem tetra - Running in parrallel? Joe CFX 5 September 9, 2006 12:37
ICEM CFD 5.1 problem with tetra count Baskaran CFX 2 March 13, 2006 13:59
ICEM TETRA Ram CFX 2 April 22, 2005 03:47
Have you used ICEM CFD TETRA and HEXA ? David Main CFD Forum 1 August 22, 2000 08:56


All times are GMT -4. The time now is 04:49.