CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

Solver was interupted by signal TERM(15).

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 30, 2004, 14:58
Default Solver was interupted by signal TERM(15).
  #1
Tony
Guest
 
Posts: n/a
The error massage is:

The CFX-5 solver was interupted by signal TERM(15). No results file has been created.

Recently I had this massage twice, anyone knows what it means?

Thanks.
  Reply With Quote

Old   September 30, 2004, 15:42
Default Re: Solver was interupted by signal TERM(15).
  #2
Juan Carlos
Guest
 
Posts: n/a
That one is known as a "software termination signal." What operating system are you running on.. Is it AIX by any chance?

Juan Carlos
  Reply With Quote

Old   September 30, 2004, 19:14
Default Re: Solver was interupted by signal TERM(15).
  #3
Tony
Guest
 
Posts: n/a
Thanks, Carlos. I am not sure about the AIX you mentioned. I remotely run it on the Linux cluster of our university's supercomputer center from my SUN station machine.
  Reply With Quote

Old   October 1, 2004, 03:35
Default Re: Solver was interupted by signal TERM(15).
  #4
deLuther
Guest
 
Posts: n/a
As I remember it can be caused by user logoff... i.e. you close console. Maybe you need run your job in background. SolverManager automatically launches task in background, but from console you need & after command. But maybe I am wrong, because at least 5.7 writes error message "because user logoff". But 5.6...maybe not.
  Reply With Quote

Old   October 1, 2004, 15:39
Default Re: Solver was interupted by signal TERM(15).
  #5
Tony
Guest
 
Posts: n/a
Thanks, That explains this.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Free Surface Ship Flow timfranke OpenFOAM Running, Solving & CFD 305 July 24, 2015 03:10
Creating New Solver: For particle-laden compressible jets sankarv OpenFOAM Running, Solving & CFD 17 December 3, 2014 20:41
Quarter Burner mesh with periosic condition SamCanuck FLUENT 2 August 31, 2011 11:34
CFX solver interrupted by signal TERM (15) martinD CFX 0 August 18, 2010 09:20
Error during Solver cfd guy CFX 4 May 8, 2001 06:04


All times are GMT -4. The time now is 18:35.