|
[Sponsors] |
October 6, 2005, 00:48 |
Negative Pressure
|
#1 |
Guest
Posts: n/a
|
I am simulating the entire pump model using CFX. In post processing results, there is a negative pressure around -4 bar (approx.). But Head delivered by the pump is correct.
The Inlet condition are Inlet dynamic pressure and outlet are velocity. Reference pressure is atmospheric. But still there is negative pressure. please give the reason? If i want to know to exact magnitude of staic or absolute pressure near the blade surface, can i use the same value or some other method is used to find, if so please inform. Since all pressure are measured from zero absolute pressure. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pressure BC for combustion chamber | Giuki | FLUENT | 1 | July 19, 2011 11:35 |
seeking for help about a room with negative pressure | mengyue1 | FLUENT | 0 | November 26, 2009 06:40 |
High pressure in rhopSonicFoam results in negative pressure | shangzung | OpenFOAM | 0 | November 5, 2009 03:24 |
negative pressure in cfx | flar.t | CFX | 1 | December 18, 2006 23:20 |
negative pressure | mAx | FLUENT | 0 | January 25, 2006 14:31 |