|
[Sponsors] |
August 21, 2007, 13:17 |
merging edges in ICEM
|
#1 |
Guest
Posts: n/a
|
hi
i have a structured meshing, the problem is that i need to specify equal node distances on my geometry and the edges are splited by various vertices, is there any option to merge the edges about a vertex. |
|
August 22, 2007, 08:04 |
Re: merging edges in ICEM
|
#2 |
Guest
Posts: n/a
|
you can manually merge the blocks. that way you will be able to merge the two faces (which describe the blocks), and thus able to remove the vertex
|
|
August 22, 2007, 10:12 |
Re: merging edges in ICEM
|
#3 |
Guest
Posts: n/a
|
Thanks, The problem actually is that I have deleted the blocks, and this edges belont to the outer end of the blocks is it possible now?
|
|
August 22, 2007, 10:41 |
Re: merging edges in ICEM
|
#4 |
Guest
Posts: n/a
|
You can copy the edge distributions from one edge to another - use 'Absolute'. As long as the edges are the same length - the distributions will be the same.
|
|
August 24, 2007, 06:06 |
Re: merging edges in ICEM
|
#5 |
Guest
Posts: n/a
|
Hey Virag. You may try this. You can transform opposite face of the face you have deleted. This way you will get a complete block.
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |
ICEM hexa mesh built with v10 deformed in v11 (degenerated edges) | cfxicem | ANSYS Meshing & Geometry | 1 | October 14, 2009 15:06 |
ICEM CFD 5.1 Hex-Tet mesh merging failure | bogesz | CFX | 1 | January 29, 2005 06:46 |