CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

periodic boundary conditon in CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 20, 2008, 09:13
Default periodic boundary conditon in CFX
  #1
Al Mazdeh
Guest
 
Posts: n/a
let's say we have a perforated plate, due to the computational limit we want to model only flow in one of the holes, how can we use periodic boundary condition,

can cfx do that?
  Reply With Quote

Old   June 21, 2008, 16:09
Default Re: periodic boundary conditon in CFX
  #2
Rogerio Fernandes Brito
Guest
 
Posts: n/a
maybe u can use symmetry and not periodic! See Tutorial 8: Supersonic Flow Over a Wing. There u will see the use of symmetry boundary type, at bottom location. But on the half of the hole, you will use Wall as boundary type.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ATTENTION! Reliability problems in CFX 5.7 Joseph CFX 14 April 20, 2010 15:45
Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 July 15, 2005 04:15
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55
Finite difference and Periodic Boundary Condition Linda Main CFD Forum 2 May 27, 2003 10:52
Problem with periodic boundary layers Phil FLUENT 15 October 2, 2000 14:56


All times are GMT -4. The time now is 16:17.