CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CFX

change CFX working directory

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2010, 16:36
Default change CFX working directory
  #1
New Member
 
dklastiwka's Avatar
 
Derek Lastiwka
Join Date: Feb 2010
Location: Calgary, Alberta, Canada
Posts: 26
Rep Power: 7
dklastiwka is on a distinguished road
Does anybody know if it is possible to change the CFX working directory used when CFX is run through ANSYS workbench 12.1. Workbench always saves the .trn files to a temp directory then when the simulation converges workbench starts to copy everything over to the workbench project directory. This can take hours for my big transient run files. I would like CFX to save the .trn files to the workbench project directory while running.

Thanks in advance
dklastiwka is offline   Reply With Quote

Reply

Tags
cfx, working directory

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Calculation of the Governing Equations Mihail CFX 7 September 7, 2014 06:27
Working directory via command line Luiz CFX 4 March 6, 2011 21:02
Importing solutions in CFX. Alphonso CFX 1 August 1, 2008 14:01
HELP!!: PARALLEL CFX ERROR IN LINUX JP CFX 8 April 24, 2008 04:03
CFX 4.4 installation problem Pandu Sattvika CFX 1 December 1, 2001 05:07


All times are GMT -4. The time now is 22:29.