|
[Sponsors] |
March 4, 2010, 00:05 |
Couldn't get convergence for RMS P-Mass
|
#1 |
New Member
Steven Tay
Join Date: Jan 2010
Posts: 28
Rep Power: 16 |
Hello All,
I am working on a model that coil a tube in a tank. The tank is filled with water and another fluid will pass thru the tube. The temp of the fluid passing thru the tube is very low (-40 degrees) thus it will slowly cools and freeze the water in the tank. I managed to get all other parameters converge except for the RMS P-Mass of the water... It will converge for a while then begin to diverge out of the convergence criteria. Do anyone know what I can do to improve the convergence of the RMS P-Mass of the water? Or is there any setting that I have missed out? Thanks and looking forward to some advises! Steven |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mass flow in is not equal to mass flow out | saii | CFX | 12 | March 19, 2018 05:21 |
Convergence of CFX field in FSI analysis | nasdak | CFX | 2 | June 29, 2009 01:17 |
mass flow convergence on interfaces | Tatiana | STAR-CCM+ | 0 | June 25, 2009 03:19 |
2 Inlet Pres BC's and Out Mass Flow - Convergence | SN | Siemens | 0 | July 19, 2006 09:12 |
no mass convergence | Tom | Siemens | 9 | March 6, 2006 04:21 |