(UDF) Sinusoidal inlet velocity in Fluent

star · December 17, 2013, 01:32

Dear friends. I want to use a UDF in which inlet velocity changes sinusoidally from 1m/s to 2m/s in first 0 to 0.1 sec and then decreases back to 1m/s in the next 0.1 to 0.2 sec. And this repetition goes on with time like this. I think it looks simple. Please guide me or send me udf if anyone has. Thanks in advance.

Best Regards
Tariq

oayeni1 · December 19, 2013, 16:23

You can use the DEFINE_PROFILE macros to define the inlet velocity. Within the macro, make the F_PROFILE variable a sinusoidal function of the fluent variable, CURRENT_TIME which stores the current flow time from fluent. Remember to hook this UDF once you start up fluent.

Cheers.

December 17, 2013, 01:32	(UDF) Sinusoidal inlet velocity in Fluent	#1
star Member Harry Join Date: May 2013 Posts: 68 Rep Power: 12	Dear friends. I want to use a UDF in which inlet velocity changes sinusoidally from 1m/s to 2m/s in first 0 to 0.1 sec and then decreases back to 1m/s in the next 0.1 to 0.2 sec. And this repetition goes on with time like this. I think it looks simple. Please guide me or send me udf if anyone has. Thanks in advance. Best Regards Tariq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF for a 3D inlet velocity profile with wave motion	kailingkk	Fluent UDF and Scheme Programming	9	May 26, 2021 07:33
UDF inlet velocity profile mismatch with Fluent	ChristineL	Fluent UDF and Scheme Programming	15	November 25, 2016 06:45
unsteady inlet velocity udf	jill	FLUENT	8	February 10, 2015 06:04
USING IF statement in a UDF for defining Velocity profile at Inlet	amir2920	Fluent UDF and Scheme Programming	3	May 23, 2013 23:46
UDF for transient inlet velocity	sharath	FLUENT	2	September 13, 2004 23:37

December 19, 2013, 16:23		#2
oayeni1 New Member Dapo Join Date: Jul 2012 Posts: 2 Rep Power: 0	You can use the DEFINE_PROFILE macros to define the inlet velocity. Within the macro, make the F_PROFILE variable a sinusoidal function of the fluent variable, CURRENT_TIME which stores the current flow time from fluent. Remember to hook this UDF once you start up fluent. Cheers.