FLUENT UDF for thermal condition in BC

Pippo · April 28, 2009, 12:51

Dear All,

I'm wondering if someone could help me!
I have the following question regarding FLUENT:
Which type of UDF is the right one for describing a time-dependent "FREE STREAM TEMPERATURE" in the Thermal BC for Convection?

I have used the "DEFINE_PROFILE" macro (following the fluent!), but I was able only to set a time dependent temperature on a face.

Could you suggest how to fix this problem or if you have experienced it?

Many thanks for everybody

Pippo

Pippo · May 6, 2009, 10:07

Dear All

I solved the problem with DEFINE_PROFILE.

Best regards!

Pippo

April 28, 2009, 12:51	FLUENT UDF for thermal condition in BC	#1
Pippo New Member Pavel Join Date: Apr 2009 Posts: 4 Rep Power: 17	Dear All, I'm wondering if someone could help me! I have the following question regarding FLUENT: Which type of UDF is the right one for describing a time-dependent "FREE STREAM TEMPERATURE" in the Thermal BC for Convection? I have used the "DEFINE_PROFILE" macro (following the fluent!), but I was able only to set a time dependent temperature on a face. Could you suggest how to fix this problem or if you have experienced it? Many thanks for everybody Pippo

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Two questions on Fluent UDF	Steven	Fluent UDF and Scheme Programming	7	March 23, 2018 03:22
problem with loading udf in fluent 6.3	James	Fluent UDF and Scheme Programming	6	January 22, 2015 05:51
Parallel Fluent +UDF	Jack Martinez	FLUENT	0	June 28, 2007 11:19
udf as Boundary condition	anup	FLUENT	2	May 23, 2007 11:51
Boundary Condition UDF for DPM	Nicholas Wood	FLUENT	0	June 16, 2004 09:02

May 6, 2009, 10:07		#2
Pippo New Member Pavel Join Date: Apr 2009 Posts: 4 Rep Power: 17	Dear All I solved the problem with DEFINE_PROFILE. Best regards! Pippo