UDF for Airfoil in Circular motion (2D)

sohail_27 · June 27, 2010, 19:57

Hi,
I am trying to run simulation (2D) for 3 bladed NACA 0012 airfoil in vertical motion with respect to central axis using gambit and fluent. I know how to create mesh for single airfoil and run simulation on it, but i don't know how to create mesh for airfoil and to rotate it in fluent. I know that we need to write a UDF for rotating the mesh but i don't know how to write a code for that.I would be glad if anyone could help me out.
Here is a youtube video of what i actually want to do. Please help me out guys, its part of my thesis.
http://www.youtube.com/watch?v=1eyEtzdHDEE

Regards.

Randre · June 28, 2010, 19:51

For a simple rotation of the blades with a constant angular velocity you don't need an UDF. Just input the velocity in rigid body dynamic mesh in FLUENT GUI.
But if your motion is flow driven then you can use DEFINE_SDOF_PROPERTIES macro and it's sub-macros.
I think that already saw an answer to your problem in this forum. Try a quick seach. Ah and FLUENT UDF manual too!

sohail_27 · June 29, 2010, 19:00

Hey,
I have created the mesh file for single airfoil using gambit, i used stationary grid at center and a circular strip which would define the path airfoil would travel while in motion and exterior domain which would be fixed mesh. but i dont know hot to rotate the circular strip region, i would be glad if you could help me with that.

Regards.

almostafa67 · July 30, 2010, 11:41

hi everybody...
i am trying to simulate peristaltic pump and for this i need to write an udf file to rotate on of edges about z axis,i will be thanfull if u could help me with this problem.
thank you in advance..

sangee · October 4, 2010, 13:36

hi
i too created 2d - cut section of airfoil for lift and drag calculation.... now i hav to get lift and draf co-efficient for different angle of attack..... how to rotate the airfoil in gambit...

June 27, 2010, 19:57	UDF for Airfoil in Circular motion (2D)	#1
sohail_27 New Member SOhail Join Date: Jun 2010 Posts: 16 Rep Power: 15	Hi, I am trying to run simulation (2D) for 3 bladed NACA 0012 airfoil in vertical motion with respect to central axis using gambit and fluent. I know how to create mesh for single airfoil and run simulation on it, but i don't know how to create mesh for airfoil and to rotate it in fluent. I know that we need to write a UDF for rotating the mesh but i don't know how to write a code for that.I would be glad if anyone could help me out. Here is a youtube video of what i actually want to do. Please help me out guys, its part of my thesis. http://www.youtube.com/watch?v=1eyEtzdHDEE Regards.

June 29, 2010, 19:00	how to rotate the grid	#3
sohail_27 New Member SOhail Join Date: Jun 2010 Posts: 16 Rep Power: 15	Hey, I have created the mesh file for single airfoil using gambit, i used stationary grid at center and a circular strip which would define the path airfoil would travel while in motion and exterior domain which would be fixed mesh. but i dont know hot to rotate the circular strip region, i would be glad if you could help me with that. Regards.

July 30, 2010, 11:41	rotation about z axis	#4
almostafa67 Member ahmad Join Date: Jul 2010 Posts: 57 Rep Power: 15	hi everybody... i am trying to simulate peristaltic pump and for this i need to write an udf file to rotate on of edges about z axis,i will be thanfull if u could help me with this problem. thank you in advance..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF problem: incorrect grid motion	Fil	FLUENT	5	December 19, 2020 09:16
Grid motion with UDF	fivos	Fluent UDF and Scheme Programming	5	June 30, 2018 08:50
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
fluent probelm"mesh motion udf"	bestrcsekhar	Main CFD Forum	0	November 2, 2008 01:38
UDF error CG Motion	Alex	FLUENT	0	March 22, 2006 17:40

June 28, 2010, 19:51		#2
Randre New Member Join Date: Mar 2010 Posts: 19 Rep Power: 16	For a simple rotation of the blades with a constant angular velocity you don't need an UDF. Just input the velocity in rigid body dynamic mesh in FLUENT GUI. But if your motion is flow driven then you can use DEFINE_SDOF_PROPERTIES macro and it's sub-macros. I think that already saw an answer to your problem in this forum. Try a quick seach. Ah and FLUENT UDF manual too!

October 4, 2010, 13:36		#5
sangee New Member sangeetha p Join Date: Sep 2010 Posts: 1 Rep Power: 0	hi i too created 2d - cut section of airfoil for lift and drag calculation.... now i hav to get lift and draf co-efficient for different angle of attack..... how to rotate the airfoil in gambit...