CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

pressure boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   May 21, 2012, 06:19
Default pressure boundary condition
  #1
Senior Member
 
hamid
Join Date: Nov 2010
Posts: 185
Rep Power: 7
hamid1 is on a distinguished road
Hi All

Is it possible to set all the boundary conditions, "pressure outlet"?
this is to create a vacuum in a pipe with a stationary fluid inside ..
hamid1 is offline   Reply With Quote

Old   May 21, 2012, 07:11
Default
  #2
New Member
 
kumar ravi
Join Date: May 2012
Posts: 4
Rep Power: 6
ravi_cfd is on a distinguished road
hi,
without an inlet ..its not possible to define an outlet.

so not possible to define all the boundaries as outlets.
ravi_cfd is offline   Reply With Quote

Old   May 21, 2012, 08:37
Default
  #3
Senior Member
 
hamid
Join Date: Nov 2010
Posts: 185
Rep Power: 7
hamid1 is on a distinguished road
thanks for reply,
the idea is to apply an aspiration in a domain which is initially still (no fluid movement before applying the aspiration force), and after applying the aspiration force the fluid should move from inlets to the aspiration boundary (aspiration boundary = minus static pressure or minus pressure outlet)
do you think i have to impose inlet pressure at inlets,

p.s. i imposed pressure outlet on every boundary, it actually works but the results is not correct to me ..
hamid1 is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 45 February 8, 2016 05:42
Pressure boundary condition C-H Kuo Main CFD Forum 11 September 17, 2015 11:41
mixed inflow/outflow downstream boundary condition question peob OpenFOAM Running, Solving & CFD 2 August 14, 2014 09:07
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Pressure Boundary condition abishek FLUENT 1 July 28, 2008 08:14


All times are GMT -4. The time now is 15:55.