CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Contours are not displayed!!!!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 16, 2012, 15:21
Exclamation Contours are not displayed!!!!
  #1
New Member
 
jeddah boy
Join Date: Jul 2012
Posts: 1
Rep Power: 0
viky is on a distinguished road
hi,
i have made a geometry in GAMBIT and have imported it in Fluent. It gets itterated and solution converges, but the problem arrises when i WRITE the file as CASE & DATA to save it. As i re-open the saved CASE and DATA file the following ERROR massage is displayed
""Note: zone-surface: cannot create surface from sliding interface zone.
Creating empty surface"".
and in some other cases i get the message
Error: Not a pair
where i am doing wrong??
viky is offline   Reply With Quote

Old   July 17, 2012, 02:18
Default
  #2
Member
 
Join Date: Jul 2012
Posts: 43
Rep Power: 5
lxlylzl is on a distinguished road
I think you might have come across the same problem (i mean same error message displayed) when importing mesh file to FLUENT. If it is so, go back to GAMBIT and create the mesh properly with well defined zones. Hope this will help you. By the way in which format are you importing your model in GAMBIT. Try ACIS.
lxlylzl is offline   Reply With Quote

Old   July 18, 2012, 05:19
Default
  #3
Senior Member
 
raymond
Join Date: Nov 2009
Posts: 149
Rep Power: 7
wlt_1985 is on a distinguished road
Quote:
Originally Posted by viky View Post
hi,
i have made a geometry in GAMBIT and have imported it in Fluent. It gets itterated and solution converges, but the problem arrises when i WRITE the file as CASE & DATA to save it. As i re-open the saved CASE and DATA file the following ERROR massage is displayed
""Note: zone-surface: cannot create surface from sliding interface zone.
Creating empty surface"".
and in some other cases i get the message
Error: Not a pair
where i am doing wrong??
Something wrong to your setting. Check your boundary conditions.
wlt_1985 is offline   Reply With Quote

Reply

Tags
aqstax, federvo.mala

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Fluent] Problem in Mach Contours Hybrid FLUENT 4 February 13, 2012 03:21
About velocity angle when plotting a contours wateraction FLUENT 0 July 24, 2010 23:24
Preconditioning and pressure contours ganesh Main CFD Forum 2 February 18, 2006 01:02
extension for liquid fraction contours venugopal FLUENT 0 June 11, 2004 01:27
contours of F_UDMI Nici FLUENT 8 September 3, 2003 03:41


All times are GMT -4. The time now is 04:05.