|
[Sponsors] |
January 23, 2013, 03:16 |
Thermal Boundary Condition
|
#1 |
New Member
shayan
Join Date: Jul 2012
Location: Australia
Posts: 27
Rep Power: 13 |
Hello Dears
I have the following case: http://imageshack.us/photo/my-images/812/46213226.jpg/ In this case, all the walls are insulated except the outer surface of the obstacle , where a constant heat flux is applied. Air(300 Kelvin) is used as a working fluid and crosses over the heated obstacle. I meshed the heated object, because there is a conduction inside that. Moreover, I meshed inside of the 2D channel for air crossing inside. After importing the mesh file in Fluent, "shadow wall" is added in the Boundary condition. What should I define the boundary condition for "water-solid interface wall(inner surface of heated object)"and "shadow wall"? Any help would be appreciated . Thank you Shayan |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Radiation interface | hinca | CFX | 15 | January 26, 2014 17:11 |
An error has occurred in cfx5solve: | volo87 | CFX | 5 | June 14, 2013 17:44 |
Switching thermal boundary condition type | symbolic | FLUENT | 1 | April 1, 2010 05:25 |
Concentric tube heat exchanger (Air-Water) | Young | CFX | 5 | October 6, 2008 23:17 |
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues | michele | OpenFOAM Meshing & Mesh Conversion | 2 | July 15, 2005 04:15 |