|
[Sponsors] |
March 13, 2013, 10:42 |
3D flow separation on buildings
|
#1 |
New Member
Join Date: Feb 2013
Posts: 18
Rep Power: 13 |
Hi everybody,
I've to evaluate if there is flow separation and eventual reattachment points on the roof of a building , which is sourronded by a huge parallelepiped of air (to simulate wind driven natural ventilation in buildings). How could I do?I've read about the plot of wall shear stress in 2D problem, but in my 3D case what is the better way? Thanks a lot for any suggestion Bests |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[CFX] Simulation of Flow Separation in a rectangular diffuser - Convergence Problem | anon_b | CFX | 11 | May 6, 2012 20:16 |
k-omega for flow separation | mike.mm | Main CFD Forum | 3 | October 3, 2011 16:05 |
Analysis of separation bubble over an low Re flow 2D Aerofoil | Ashish_Mittal | FLUENT | 0 | August 9, 2011 09:14 |
About gas flow and buildings | Andreas | Main CFD Forum | 1 | October 25, 2001 13:37 |
Question on 3D potential flow | Adrin Gharakhani | Main CFD Forum | 13 | June 21, 1999 05:18 |