CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Please help me

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 17, 2013, 11:42
Unhappy Please help me
  #1
Member
 
mehdimoradi
Join Date: Jun 2013
Posts: 50
Rep Power: 4
mehdimoradi. is on a distinguished road
Hello
I'm tired a problem for a long time. Please help me.......
Does anyone know if it is possible to use mass flow outlet for multiphase flow in FLUENT 6.3.26?
mehdimoradi. is offline   Reply With Quote

Old   July 17, 2013, 13:07
Default
  #2
Member
 
shubham
Join Date: Mar 2009
Posts: 48
Rep Power: 8
shubham208011 is on a distinguished road
I dont think u can use directly enter the value of mass flow rate at outlet..

By the way, what is your objective to enter the mass flowrate at outlet??
shubham208011 is offline   Reply With Quote

Old   July 17, 2013, 14:13
Default
  #3
Member
 
mehdimoradi
Join Date: Jun 2013
Posts: 50
Rep Power: 4
mehdimoradi. is on a distinguished road
I am going to simulate drying process in a continuous grain dryer. wet grains enter drying bin at its top section with known mass flow rate, dried grains with the same inlet value are exit from bottom part of the drying bin. Hot air is blow through grain bed. (from bottom to top)
In defining b.cs it would be needed to insert mass flow outlet of grains in outlet port. Is it true?
mehdimoradi. is offline   Reply With Quote

Old   July 17, 2013, 16:27
Default
  #4
PJT
New Member
 
Join Date: Mar 2013
Posts: 3
Rep Power: 4
PJT is on a distinguished road
In the interface of the mass flow outlet, you can mark "target mass flow rate", than put your values.... I believe you can do that.
PJT is offline   Reply With Quote

Old   July 18, 2013, 02:02
Default
  #5
Member
 
mehdimoradi
Join Date: Jun 2013
Posts: 50
Rep Power: 4
mehdimoradi. is on a distinguished road
Thanks for your reply. But in multiphase state this option is not available.
mehdimoradi. is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 12:37.