CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Change operating pressure without redoing simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 29, 2013, 05:00
Default Change operating pressure without redoing simulation
  #1
Senior Member
 
Join Date: Nov 2013
Posts: 689
Rep Power: 9
pakk is on a distinguished road
I have done a time-consuming simulation, that finally converged, and it was done at an operating pressure of 100 Pa.
Now I have to append it to a second simulation, that was run at an operating pressure of 200 Pa...

Is there an easy way to change the results in my first Fluent simulation, such that the operating pressure is increased by 100 Pa, and the guage pressures decreased by 100 Pa, so that physically it remains the same solution? The difficult way is doing the simulation again at a different operating pressure, but I hope to avoid that...
pakk is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pressure Outlet for phase change simulation dinesh FLUENT 0 November 22, 2013 00:50
Transient simulation (Problem with massflow and Pressure) ChristianF CFX 4 August 22, 2011 21:42
OPERATING PRESSURE manish FLUENT 6 February 25, 2011 05:40
Terrible Mistake In Fluid Dynamics History Abhi Main CFD Forum 12 July 8, 2002 09:11
Hydrostatic pressure in 2-phase flow modeling (long) DS & HB Main CFD Forum 0 January 8, 2000 16:00


All times are GMT -4. The time now is 02:45.