Home > Forums > Software User Forums > ANSYS > FLUENT

In symmetric geometry results are not symmetric.

Updated Threads

Reply

Search this Thread

July 27, 2015, 08:53	In symmetric geometry results are not symmetric.	#1
vikasy123 New Member vikas yadav Join Date: Jul 2015 Posts: 9 Rep Power: 10	I need some advice ... i am doing 3d simulations of heat transfer in microchannel heat sink. Heat sink is symmetric from centre of inlet to centre of outlet. But i am not getting symmetrical results. Any suggestions where i might be doing wrong. your advice will be very helpful.

July 27, 2015, 08:55		#2
vikasy123 New Member vikas yadav Join Date: Jul 2015 Posts: 9 Rep Power: 10	your advice will be very helpful

Reply

Tags

results, symmetrical

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] 2D mesh from a 3D geometry results in 1m thick mesh	herrolsen	ANSYS Meshing & Geometry	2	March 26, 2019 15:00
Comparing Air numerical results with water experimental results	cristian2009es	Main CFD Forum	1	July 2, 2014 18:11
tet results vs hex results	sivakumar	OpenFOAM Running, Solving & CFD	0	March 4, 2014 10:15
[DesignModeler] Error while Loading a Geometry	JD944	ANSYS Meshing & Geometry	0	October 25, 2011 14:51
[Gmsh] Problem meshing an imported geometry	Alicia	OpenFOAM Meshing & Mesh Conversion	0	March 30, 2010 04:53

All times are GMT -4. The time now is 07:45.