|
[Sponsors] |
March 10, 2000, 09:07 |
Reference Value Selection
|
#1 |
Guest
Posts: n/a
|
I am a little confused on how to select proper reference values for my problem.
I am using Fluent 5.3, how do changes to the reference values, show under Reports->Reference Values..., effect the overall solution. Where in the Fluent manual can I find literature on these effects. Thanks in advance! |
|
March 10, 2000, 17:23 |
Re: Reference Value Selection
|
#2 |
Guest
Posts: n/a
|
The reference values are for postproccessing, thus the values you specify there should not affect your solution. See the section on Reference Values under the Alphanumeric Reporting section of your Fluent 5 User's Guide. Mine is in chapter 21 section 21.7 of volume 4 with a publication date of 1998.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Second Derivative Zero - Boundary Condition | fu-ki-pa | OpenFOAM | 11 | March 27, 2021 05:28 |
Error with Wmake | skabilan | OpenFOAM Installation | 3 | July 28, 2009 01:35 |
OpenFOAM on MinGW crosscompiler hosted on Linux | allenzhao | OpenFOAM Installation | 127 | January 30, 2009 20:08 |
G95 + CGNS | Bruno | Main CFD Forum | 1 | January 30, 2007 01:34 |
Building OpenFoAm on SGI Altix 64bits | anne | OpenFOAM Installation | 8 | June 15, 2006 10:27 |