CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT

free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin

Register Blogs Community New Posts Updated Threads Search

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 7, 2000, 23:50
Default free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin
  #1
Kaushik
Guest
 
Posts: n/a
I am working at present on free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin project. The problem is that the solution is not converging.

A brief review

In immersion cooling of electronic equipment there is often a heated horizontal surface directly exposed to a liquid with a free surface. Vertical fins attached to a cooled surface then project vertically downwards into the liquid. Boiling occurs at the heated surface in many real situations but in some cases and under some operating conditions there is no boiling and the heat transfer from the heated surface to the liquid and then to the fins is by free convection.

In this analysis this particular case of free convection from the hot surface directly exposed to a liquid with a free surface to vertical fins attached to a cooled surface that project vertically downwards into the liquid is considered.

The fluid is fc72, the fin is made of Copper and the free surface is considered to be a solid of very low conductivity.

Assumptions:

The cooled surface and the fin are at same temperature.

thickness of the fin is small compared to the distance between the fins and the effect of the fin thickness on the solution is therefore negligible.

This is the description of the problem. It would be helpful if anybody can help me out. If the solution for this problem exist I would like some help regarding this problem.

  Reply With Quote

Old   May 8, 2000, 06:47
Default Re: free convection heat transfer from a heated horizontal surface through a liquid to a thin cooled fin
  #2
Jin-Wook LEE
Guest
 
Posts: n/a
Dear Kaushikg

Your problem(fluid flow over the heated horizontal surface) is hydrodynamically unstable, so that difficult convergence is originated from the its basic nature. This kind of problem is similar to the fluid flow of rotating inner cylinder, in point of hydrodynamic stability view.

Sometimes, that kind of problem does not have steady state solution. Instead, it shows periodic behavior along the time span.

How about to solve the problem by time marching method ? Then, you might see two types of phisical behavior. One is to reach steady state after some transient(oscillating with or without periodicity) behavior. And the other is to show the periodical behavior continuously. If it shows the latter behavior(continuously periodic), the real physical situation may not have steady state solution. It might have only periodical solution.

Sincerely, Jinwook.
  Reply With Quote

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Forced convection heat transfer in heat sink Sidy FLUENT 1 October 18, 2008 03:27
Heat Transfer on the outer surface of cylinder? Alireza FLUENT 2 February 13, 2006 02:22
CFX-5.5 simulating air free convection Dustin Lee CFX 0 April 16, 2003 02:54
CFX 4.4 New free surface option Viatcheslav Anissimov CFX 0 April 3, 2002 06:27
sphere in a free surface (thin film)flow Vasu Veerapaneni Main CFD Forum 0 September 15, 1998 17:32


All times are GMT -4. The time now is 11:13.