CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

export files

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 27, 2000, 10:14
Default export files
  #1
Sebastien DANIEL
Guest
 
Posts: n/a
Hey all;

I wish to export some output files like temperature or pressure as input file in an other program in Fortran.

With fluent I can export file in .fvc or.fvd but could I export in .f to be readed in a fortran program?

Thank you in advance.

Sebastian Daniel
  Reply With Quote

Old   August 8, 2000, 19:06
Default Re: export files
  #2
manuel
Guest
 
Posts: n/a
hello Sebastian, i am working with Fidap and also with Fortran, you can make "neutral files" on command FI-Post, then all,and finally enter neutral and you will select a parameter and put a name-file, each one with any parameter like velocity, pressure or temperature; then you can read that files in Fortan with command open. i hope this help you. bye
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
UDF issue MASOUD Fluent UDF and Scheme Programming 14 December 6, 2012 14:39
critical error during installation of openfoam Fabio88 OpenFOAM Installation 21 June 2, 2010 03:01
OF 1.6 | Ubuntu 9.10 (64bit) | GLIBCXX_3.4.11 not found piprus OpenFOAM Installation 22 February 25, 2010 14:43
Problems in compiling paraview in Suse 10.3 platform chiven OpenFOAM Installation 3 December 1, 2009 08:21
OpenFOAM on MinGW crosscompiler hosted on Linux allenzhao OpenFOAM Installation 127 January 30, 2009 20:08


All times are GMT -4. The time now is 03:40.