CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Heat exchanger model

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 19, 2000, 10:20
Default Heat exchanger model
  #1
Dotti Massimo
Guest
 
Posts: n/a
I'm trying to set on the heat exchanger module described in 6.23 . I checked m * cp for air being lesser than m * cp for coolant, set into the model a good amount of hot air, let it pass through the exchange region but nothing happens. The porous behaviour of the region were set on automatically, but no heat exchange ever occured. Do anyone had the same problem? Is there someone with a suggestion? Thanks Massimo
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Heat Exchanger Model sak2129 FLUENT 2 December 8, 2014 08:28
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Heat Exchanger Model - urgent JSM FLUENT 6 September 22, 2007 04:25
BIG TROUBLE with heat exchanger and porous media!! Andrea FLUENT 0 February 20, 2005 08:49
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 16:55


All times are GMT -4. The time now is 04:24.