CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

residuals problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 11, 2001, 22:50
Default residuals problem
  #1
ydzhang
Guest
 
Posts: n/a
Dear fluent users:

I have a problem about residuals.I model a 13-spieces problem.The stucture of flowfields is correct,and the results seem to be accepted.I adapted the mesh and the solution changes very little. So, maybe it is independent of mesh. But the scaled residuals of some variables only decrease to 1e-2,then fluctuate.I check the flux.It balanced.I don't meet this situation before.I want to know why the scaled residuals don't decrease.

many thanks in advance

ydzhang

  Reply With Quote

Old   August 13, 2001, 10:37
Default Re: residuals problem
  #2
Herve
Guest
 
Posts: n/a
... maybe need more underrelaxation.
  Reply With Quote

Old   August 14, 2001, 01:42
Default Re: residuals problem
  #3
ydzhang
Guest
 
Posts: n/a
Thanks Herve!

I have selected the coupled solver,not Seg solver.No underrelaxation factors need. any other advices are welcome! ydzhang 2001/8/14
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem with residuals, especially continuity Ozgur_ FLUENT 2 December 3, 2013 06:48
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
Can I solve this problem by Fluent? Kai_kc FLUENT 1 October 27, 2010 05:29
Convergence - scaled vs unscaled residuals HS FLUENT 1 November 7, 2005 06:45
Is this problem well posed? Thomas P. Abraham Main CFD Forum 5 September 8, 1999 14:52


All times are GMT -4. The time now is 13:30.