CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

multiphase jet

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 21, 2002, 07:56
Default multiphase jet
  #1
Nicolas Huybrechts
Guest
 
Posts: n/a
Hello

i try to simulate a water jet flow in a tube but it doesn't converge.

I use the VOF model and the time step is 1e-6.

the water can't come in the air tube.

does somebody have already studied a such flow?

Nicolas
  Reply With Quote

Old   October 22, 2002, 09:25
Default Re: multiphase jet
  #2
david
Guest
 
Posts: n/a
What type of VOF did you use? Whats the BCs at the edge of receiving cylinder? Type of mesh? DC
  Reply With Quote

Old   October 22, 2002, 10:58
Default Re: multiphase jet
  #3
nicolas huybrechts
Guest
 
Posts: n/a
I first use the VOF with Geo constructor.

Then i use the mixture model with the slip velocity option.

When i use fuel in a water tube, both methods converge but the time step selected by the time adaptive is very smaller with the VOF (1e-5 after some iterations) than with the mixture model (0.1s after some iterations). At initialization, the time time is 1e-4

but when i use water (or fuel) in a tube full of air, the VOF doesn't converge.

the geometry is a 2d'one.

It consist of a small tube connected to a bigger one

As BC, i impose :

inlet of the small tube velocity: 1 m/s fraction volume 1 turbulence intensity and diameter

inlet of the big tube atmospheric pressure

outlet atmospheric pressure

the mesh is hexahedral without boundary layer but the mesh is raffined near the connection of the tubes

Nicolas
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2D Plane Jet Fluent Solution doug Main CFD Forum 10 October 16, 2013 00:47
Multiphase flow (Comp. jet of gas into liquid) Sarah FLUENT 1 October 7, 2013 21:39
Jet fan and Tunnel simulation ahlo7 CFX 7 March 7, 2012 10:25
determination of jet front Fred CFX 5 February 11, 2007 12:01
IMPINGING JET ........... HELP!!!!!!!! Amir Omoumi Main CFD Forum 10 August 30, 1999 22:11


All times are GMT -4. The time now is 12:26.