|
[Sponsors] |
|
November 19, 2002, 03:39 |
Convergence confirmation
|
#1 |
Guest
Posts: n/a
|
Hello.
After getting the solution, I am facing a difficulty in judging that the particular set of input turbulence parameters (example; Dissipation length scale & Turbulence intensity in standard K E modal), being selected are correct. For this, should I check the residuals of turbulence only or do I need to check something else. I will appreciate your guidance in this regard IRFAN |
|
November 19, 2002, 13:13 |
Re: Convergence confirmation
|
#2 |
Guest
Posts: n/a
|
what u r putting for these DL scale/ TI in S k-e?
|
|
November 19, 2002, 23:01 |
Re: Convergence confirmation
|
#3 |
Guest
Posts: n/a
|
For judging the turbulence parameters, u could get the values these from the report pull down menu. and also have a look user manual ch10 in last few paras.
Alamgir |
|
November 24, 2002, 00:54 |
Re: Convergence confirmation
|
#4 |
Guest
Posts: n/a
|
Dear sir I have a problem with this title. If it's possible for you please send me your received responses. Very thanks for your attention to my request. With the best regards. Mahdi saniee nezhad
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Convergence | Centurion2011 | FLUENT | 48 | June 14, 2022 23:29 |
Force can not converge | colopolo | CFX | 13 | October 4, 2011 22:03 |
Convergence of CFX field in FSI analysis | nasdak | CFX | 2 | June 29, 2009 01:17 |
Defect correction and convergence | ganesh | Main CFD Forum | 4 | June 30, 2006 14:20 |
convergence confirmation | Irfan | Main CFD Forum | 1 | November 19, 2002 05:05 |