CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Moving and deforming mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 19, 2003, 08:12
Default Moving and deforming mesh
  #1
paolo
Guest
 
Posts: n/a
Hi all,

I'm using the moving and deforming mesh feature of Fluent for moving a profile inside a flow. For the deformation of the mesh I have chosen the spring method, with smoothing, thus no layering and remeshing. It happens that previewing the mesh deformation, I can see only the first layer of cells (those attached to the profile) moving, whereas the others stay still. In another mesh I used, stored in a different file, all the mesh close to the profile, and not only the first row was moving. I checked all the parameters I used, and they are all the same. I don't know what's wrong in the model.

Bye,

Paolo
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Moving Deforming Mesh Riccardo FLUENT 17 January 9, 2015 07:04
domain interface for moving and deforming mesh chetan mundhe CFX 1 December 2, 2007 17:27
udf for moving and deforming mesh xie haibo FLUENT 4 October 27, 2002 07:45
Steps for moving and deforming mesh Riccardo FLUENT 0 September 12, 2002 08:18
Moving / Deforming mesh Alexandre FLUENT 1 July 7, 2001 05:44


All times are GMT -4. The time now is 03:44.