CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Roughness

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 2, 2003, 11:05
Default Roughness
  #1
Deb
Guest
 
Posts: n/a
Hi all!

I use the standard k epsilon model and I'd like to take account of wall roughness effects. If I choose STANDARD WALL FUNCTIONS or NON-EQUILIBRIUM WALL FUNCTIONS as Near Wall Treatment, I can in the Wall Boundary conditions panel set a value for the roughness height and the roughness constant. But if I choose ENHANCED WALL TREATMENT as Near Wall Treatment there is no wall roughness panel in the wall panel. How can I set the roughness height value in this case ?

Thanks in advance.

Deb
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
nutRoughWallFunction and Surface Roughness Documented AlanR OpenFOAM Programming & Development 48 July 31, 2015 02:47
Laminar flow and wall roughness junbbung FLUENT 1 December 2, 2012 06:57
Surface roughness in Flow-3d Marco FLOW-3D 2 December 23, 2008 22:12
NACA standart roughness DAK565656 Main CFD Forum 2 August 24, 2005 00:47
Roughness adaptation in CFX 4.4 Bart CFX 1 May 2, 2003 08:32


All times are GMT -4. The time now is 09:02.