CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

floating point error

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 29, 2003, 13:36
Default floating point error
  #1
emma
Guest
 
Posts: n/a
Hi all,

I am calculating cavitation in a servo valve(3d)using RNG turbulence model. After 130 iterations, I got some message as following:

Error: floating point error: invalid number

epsilon equation: tol. 1.#INFe+00 0 1.#INFe+00 1 1.#QNBe+00 2 1.#QNBe+00 . . . . . .

This means epsilon is too big to get the adequate turbulent viscosity? Any suggestion is highly appreciated.

  Reply With Quote

Old   January 1, 2004, 01:48
Default Re: floating point error
  #2
sijal ahmed
Guest
 
Posts: n/a
check ur boundary conditios carefully.

also lower the values of under relaxation factor and use the coupled implicit solver

hope this will help
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
c++ libraries and solver compiling vaina74 OpenFOAM Installation 13 February 3, 2012 18:43
Problem with UDF compiling for kTkLW model Wantami FLUENT 0 July 18, 2011 06:11
Accessing phi from a fvPatchField at same patch johndeas OpenFOAM 1 September 13, 2010 21:23
Version 15 on Mac OS X gschaider OpenFOAM Installation 120 December 2, 2009 11:23
Problem with compile the setParabolicInlet ivanyao OpenFOAM Running, Solving & CFD 6 September 5, 2008 21:50


All times are GMT -4. The time now is 13:01.