CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Getting Higher Turbulance Viscosity Ratio

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 10, 2004, 01:26
Default Getting Higher Turbulance Viscosity Ratio
  #1
Chetan
Guest
 
Posts: n/a
Hi all, I am working on air flow in a horizontal cylinder. Air entry is vertical downword, tangential from the top side and exit is vertical out. Cylinder is closed from both end side horizontal

I have taken k-e model for analysis, flow inlet is 5.0 m/s and for exit I have taken outflow condition. energy equation is not selected for solving only flow equation.

I am getting turbulent viscosity ratio is very high in the all iteration as more than 1.0e+05 (beyond its limits). I could not understand the phenomena in fluent. I have tried various flow condition but same error. The solution is not converged and exits giving an error as "invalid number". Please help me out

When I have taken "Invisid" flow with energy equation, it converged but in boundary condition fluent is not allowing the conduction at wall. What may the problem. please help me out

Thanking you all

Chetan Shah
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
pressure eq. "converges" after few time steps maddalena OpenFOAM Running, Solving & CFD 69 July 21, 2011 08:42
Higher Turbulemt Viscosity Ratio Chetan FLUENT 0 February 4, 2004 02:45
On limiting to turbulent viscosity ratio! varghese FLUENT 2 November 15, 2003 09:56
Problem of Turbulent Viscosity Ratio Limited David Yang FLUENT 3 June 3, 2002 07:13
significance of viscosity ratio phil FLUENT 15 January 30, 2002 06:39


All times are GMT -4. The time now is 23:41.