CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

How to Grid the 3mm thick Swirl plate

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 25, 2004, 01:10
Default How to Grid the 3mm thick Swirl plate
  #1
chetan shah
Guest
 
Posts: n/a
I have problem of heat transfer through a combustor woth 3mm thk swirl plate welded on outer surface, acting like fin. When i am giving a mesh to that sheet volume in Gambit, it took to much time for dense grid. & lower dense grid I can not apply.

Please guide me for the type od grid, which I can apply or guide me about the procedure.

Can size function solve the problem??

Thanks all
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
On grid independent solution for pulsatile flow David FLUENT 4 June 8, 2005 16:20
GRID TO GRID INTERPOLATION in FLUENT calogero FLUENT 3 June 4, 2003 08:32
Combustion Convergence problems Art Stretton Phoenics 5 April 2, 2002 05:59
Troubles modelling flow through a grid Hans Klaufus CFX 1 June 28, 2000 16:43
Grid Independent Solution Chuck Leakeas Main CFD Forum 2 May 26, 2000 11:18


All times are GMT -4. The time now is 06:01.