CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

3d wing modelling tutorial

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   June 16, 2004, 04:44
Default 3d wing modelling tutorial
  #1
Omar Hazbon
Guest
 
Posts: n/a
Hi Everybody, I'm new in fluent and I'm modeling a 3d wing in gambit. I know how to do the geometry, but I need help setting up the boundary conditions and the solution in fluent. I'm not getting good results for the coefficient of lift (7.4, very high!). Also I don't know how to refine the mesh, or if I'm using the correct one. I'll appreciate if somebody can provide me a document containing the procedure to follow or a tutorial. I'm following the tutorial in this web site: http://www.enseeiht.fr/hmf/travaux/C...nual/index.htm The solution steps in fluent and the boundary conditions in gambit are not mentioned. Cheers, Omar Hazbon S3045812@student.rmit.edu.au omarhazbon@hotmail.com
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tutorial to help tank sloshing modelling (CFX 12.1) enghamed CFX 13 August 21, 2011 20:43
Numeric modelling of rigid wing sail anishks2 Main CFD Forum 0 July 14, 2011 17:41
Modelling flow around a flapping wing balkrishna Main CFD Forum 1 February 19, 2010 00:32
tutorial for airflow modelling in a room shahriel FLUENT 0 September 4, 2008 10:40
delta wing modelling in cfx kaushik CFX 6 June 7, 2007 04:09


All times are GMT -4. The time now is 18:19.