CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

fluidized bed drynig modelling(wet solid+gas)

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 14, 2005, 11:36
Default fluidized bed drynig modelling(wet solid+gas)
  #1
masood yooceframandi
Guest
 
Posts: n/a
i wanna to simulate fluidized bed dryer in fluent.i have a vertical cylinder which have a perforated plate at down.wet solid enter to the cylinder at top of that and gas enter the cylinder from down(perforated plate).the gas passes through wet solid and fluidizes that.wetness of wet solid evaporates and enter to the gas.this process is continious. now,i dont know,who to use fluent for modelling of solid media(porous media).can fluent model both of the gas and solid?or can i use porouse media as a "source term" for gas governing equations? which version of the fluent can do that?and is there any tutorial for that?(fluidized bed) king regards
  Reply With Quote

Old   January 18, 2005, 08:48
Default Re: fluidized bed drynig modelling(wet solid+gas)
  #2
CFD sage
Guest
 
Posts: n/a
You can try MFIX is free, lite and powerful, you will need a frotran compiler, check it out at www.mfix.org!!!
  Reply With Quote

Old   January 18, 2005, 12:55
Default Re: fluidized bed drynig modelling(wet solid+gas)
  #3
yooceframandi
Guest
 
Posts: n/a
i use fluent,is the MFIX an ability of fluent?how can i use MFIX in fluent?
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
gas solid fluidizd bed with cfx mohamad CFX 5 July 28, 2010 15:15
Constant velocity of the material Sas CFX 15 July 13, 2010 08:56
mass flow in is not equal to mass flow out saii CFX 2 September 18, 2009 08:07
gas solid fluidized bed with ansys cfx mohamad CFX 0 November 21, 2007 18:55
CFX4.3 -build analysis form Chie Min CFX 5 July 12, 2001 23:19


All times are GMT -4. The time now is 11:59.