CFD Online Logo CFD Online URL
Home > Forums > FLUENT

problem of heat flux conservation

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   June 2, 2005, 11:23
Default problem of heat flux conservation
Posts: n/a
Hi everybody I have modelized three fluids cavity separated by solids wall the fluids is in natural convection I fixed different temperature at the extremity of my geometrie All boundarie conditions expect hot and cold side are adiabatic I simulated it in2D and 3D model

When I measured the flux at cold and hot side I don't have the same . How can it possible that I lost one parts of this flux. I have try different mesh and different conductivity for fluid and solid .It seems that the flux difference depends of the conductive ratio between solid and fluid.

Someone can help me? Thanks everybody.
  Reply With Quote

Old   June 3, 2005, 12:16
Default Re: problem of heat flux conservation
Posts: n/a
If you are solving unsteady problem then it is possible that the thermal energy is being stored in the fluid and therefore their temperature rises. In this case you will not get the same heat flux at the boundaries.

  Reply With Quote

Old   June 5, 2005, 12:06
Default Re: problem of heat flux conservation
Posts: n/a
Thanks for your answerd but I am in sationary problem. And there are the same problem whith other CFD code like Fenlab
  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wall Heat Flux & Temperature Greg Perkins FLUENT 10 November 20, 2015 10:32
heat flux balance problem zhouziyi7123 FLUENT 5 May 21, 2014 03:37
Heat flux in ansys cfx juliom OpenFOAM Running, Solving & CFD 2 April 14, 2009 14:30
Concentric tube heat exchanger (Air-Water) Young CFX 5 October 6, 2008 23:17
heat flux to heat rejection azmir CD-adapco 0 June 23, 2004 20:53

All times are GMT -4. The time now is 13:41.