CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Turbulent slug flow

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   December 22, 2005, 04:42
Default Turbulent slug flow
  #1
Paul_C
Guest
 
Posts: n/a
Dear All,

Does anyone has any idea which turbulent model i should use for slug flow in a channel?

Any advice will be appreciated.

Thanks in advance
  Reply With Quote

Old   December 25, 2005, 04:07
Default Re: Turbulent slug flow
  #2
nasser
Guest
 
Posts: n/a
use VOF Model
  Reply With Quote

Old   December 26, 2005, 04:47
Default Re: Turbulent slug flow
  #3
Paul_C
Guest
 
Posts: n/a
Thanks for your reply.

Is there any article regarding when the slug flow will be turbulent or laminar? If it is turbulent, what are the suitable models?

the flow considered here is through a mini channel of 2x2mm with a Re of about 10.

Thanks in advance

  Reply With Quote

Old   December 27, 2005, 21:24
Default Re: Turbulent slug flow
  #4
Chetan Kadakia
Guest
 
Posts: n/a
Define slug flow...

Re = 10 is pretty low. Use the laminar model.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
reversed flow at pressure inlet and turbulent viscosity is limited.... cfdiscool FLUENT 10 June 10, 2015 06:15
slug flow simulation mvee FLUENT 5 August 9, 2012 08:05
modelling laminar and turbulent flow in the same Ol FLUENT 2 November 25, 2005 03:52
Reynolds and Turbulent Flow Frederic Dubinski Main CFD Forum 2 October 20, 2004 13:57
fluid flow fundas ram Main CFD Forum 5 June 17, 2000 21:31


All times are GMT -4. The time now is 15:30.