CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

how to simulate centrifugal pump?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 21, 2006, 17:35
Default how to simulate centrifugal pump?
  #1
Alex
Guest
 
Posts: n/a
Hello everyone,

I am currently doing a project by working with Femlab/Comsol. There is a question I am stuck at: simulating the pump. DOES anyone knows how to approach this issue in Femlab or Comsol,like how to draw the geometry or which Module category I should use? At least any tips on how to approach this issue would be grateful!Thank you!

Here is my msn if you can offer some info: alecxie@msn.com ,or juz drop me a line,thanks!

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
release of the ERCOFTAC centrifugal pump - Fourth OpenFOAM Workshop olivier OpenFOAM 5 June 26, 2014 11:10
Autoblade centrifugal pump template mahdi balali NUMECA 3 February 18, 2014 09:56
Centrifugal Pump and Turbulence Model Michiel CFX 12 January 25, 2010 04:20
centrifugal pump and centrifugal fan Mangesh Main CFD Forum 3 January 3, 2006 12:21
stator-rotor interaction in the centrifugal pump G.H.Lee Main CFD Forum 4 May 25, 1999 07:33


All times are GMT -4. The time now is 00:20.