CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Reg :Particle trajectory report.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 23, 2006, 04:11
Default Reg :Particle trajectory report.
  #1
GANESH
Guest
 
Posts: n/a
I am working on modeling of cyclone seperators.In that when i do DPM particle injection ,which i do as a surface injection ,iam getting a report of particle like this

number tracked = 24, escaped = 9, aborted = 0, trapped = 0, evaporated = 0, incomplete = 15

Note : my no of steps is 1e+08, step length factor is =5.

The case which i reported is for a particle of 30 microns. ,but when i do it for a particle of 20 microns ,all particles that are tracked are escaping .I dont understand why it is happening like this .

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Particle Trajectory calculation yueroo FLUENT 2 July 13, 2009 13:32
DPM UDF particle position using the macro P_POS(p)[i] dm2747 FLUENT 0 April 17, 2009 01:29
how to output particle trajectory coordinate data steven CFX 0 July 13, 2006 17:49
How to report the particle trajectory to a file Devy FLUENT 0 January 11, 2005 10:26
Particle Trajectory calculation when particle hit yueroo FLUENT 2 February 28, 2001 05:26


All times are GMT -4. The time now is 06:40.