Specifying a velocity profile in Fluent

November 28, 2006, 10:47

Hi All,

I am using a K-E turbulence model to model flow over a domes structure. However I need to specify an input velocity profile.

I have looked in the boundry conditions and set it to velocity inlet. When setting these settings I cannot change the velocity profile off the constant that appears.

Can anyone help?

Many thanks in advance, EDD

November 28, 2006, 19:13

Hi... You will need to use a UDF to do this. Then read in the UDF. Go to DEFINE >> USER DEFINED >> FUNCTIONS >> INTERPRETED

Choose COMPILED if you plan to compile it on your own. There is some documentation on how to set up UDFs. Refer to the UDF manual in the documentation. Section 3.1.2 has a good example!

Once you have read your UDF it should appear as a choice in your velocity boundary condition panel.

Take care, Phil

November 28, 2006, 10:47	Specifying a velocity profile in Fluent	#1
Edward Sayce Guest Posts: n/a	Hi All, I am using a K-E turbulence model to model flow over a domes structure. However I need to specify an input velocity profile. I have looked in the boundry conditions and set it to velocity inlet. When setting these settings I cannot change the velocity profile off the constant that appears. Can anyone help? Many thanks in advance, EDD

November 28, 2006, 19:13	Re: Specifying a velocity profile in Fluent	#2
Seeker Phil Guest Posts: n/a	Hi... You will need to use a UDF to do this. Then read in the UDF. Go to DEFINE >> USER DEFINED >> FUNCTIONS >> INTERPRETED Choose COMPILED if you plan to compile it on your own. There is some documentation on how to set up UDFs. Refer to the UDF manual in the documentation. Section 3.1.2 has a good example! Once you have read your UDF it should appear as a choice in your velocity boundary condition panel. Take care, Phil

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[UDF] Relative coordinates in logarithmic velocity profile	cfdworker	Fluent UDF and Scheme Programming	25	July 13, 2017 03:44
Using Line/Rakes as a Velocity Profile in Fluent	JLRC87	Main CFD Forum	0	March 16, 2010 12:21
setting a velocity profile like in Fluent	gerado	OpenFOAM	2	June 4, 2009 08:53
Velocity Profile	Jeff	FLUENT	1	November 24, 2008 08:21
Prescribed inflow velocity profile - how to?	Alan	Main CFD Forum	10	October 28, 2005 12:14