CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

mesh for a COMPRESSOR

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 9, 2007, 01:58
Default mesh for a COMPRESSOR
  #1
Txema
Guest
 
Posts: n/a
Does Fluent has a program to make meshes for TURBOMACHINERY aplications?? For example, CFX has a program, "TurboGrid", for turbomachinery aplications

Txema

  Reply With Quote

Old   February 9, 2007, 02:26
Default Re: mesh for a COMPRESSOR
  #2
Suvajyoti Guha
Guest
 
Posts: n/a
FLUENT has got a turbomodule, which predeomposes the volume and you can mesh using default configuration of Quadrilateral meshes, but its better to follow bottom up approach in meshing for turbomachineries ( while using turbomodule)
  Reply With Quote

Old   February 9, 2007, 03:47
Default Re: mesh for a COMPRESSOR
  #3
Txema
Guest
 
Posts: n/a
what is the name of this module of turbomachinery??
  Reply With Quote

Old   February 10, 2007, 08:23
Default Re: mesh for a COMPRESSOR
  #4
Suvajyoti Guha
Guest
 
Posts: n/a
Its not named anything.... it comes along with gambit and you can use it if you have the license ....
  Reply With Quote

Old   February 12, 2007, 05:14
Default Re: mesh for a COMPRESSOR
  #5
cem
Guest
 
Posts: n/a
Hi, The mesh generator for Fluent is called as Gambit. In Gambit you have a special feature called as Gambit/Turbo which creates turbomachinery meshes.
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Native Meshers: snappyHexMesh and Others 2 March 27, 2011 21:11
external flow with snappyHexMesh chelvistero OpenFOAM 11 January 15, 2010 19:43
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 11:55
basic of mesh refinement arya CFX 4 June 19, 2007 12:21
adaptive mesh & UDF for cylinder compressor Pedro_RZ FLUENT 0 April 18, 2007 03:57


All times are GMT -4. The time now is 19:54.