CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Wall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 19, 2007, 17:54
Default Wall
  #1
braket
Guest
 
Posts: n/a
I define a 2-D model. Open 'display' and 'grid' and I see many WALLs under 'Surfaces' column. I chose some walls, howere, they can not be seen in the figure. Why? where are they from? Thank you.
  Reply With Quote

Old   February 20, 2007, 06:27
Default Re: Wall
  #2
Gernot
Guest
 
Posts: n/a
I guess you have fluid and solid parts in your calculation. if the interface between the solid and liquid is not defined before, fluent creats walls/shadow-walls. If you display nothing else but these walls you should see them. hope that helps Gernot
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Natural convection in a closed domain STILL NEEDING help! Yr0gErG FLUENT 3 June 12, 2013 02:12
Water subcooled boiling Attesz CFX 7 January 5, 2013 04:32
Fluent3DMeshToFoam simvun OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 48 May 14, 2012 05:20
Errors running allwmake in OpenFOAM141dev with WM_COMPILE_OPTION%3ddebug unoder OpenFOAM Installation 11 January 30, 2008 21:30
Multicomponent fluid Andrea CFX 2 October 11, 2004 05:12


All times are GMT -4. The time now is 21:13.