CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Reflect in TGrid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 15, 2007, 23:02
Default Reflect in TGrid
  #1
Vivek Vasudevan
Guest
 
Posts: n/a
Hi folks,

I am using TGrid 4.0.16 to import an STL file for my geometry. I require to reflect a unit cell of the geometry in the x direction. However, TGrid only allows me to view a reflection about a user-defined plane (say, x = 0.25). It does not allow me to manipulate the reflected entity. For example, if I select a face on the reflection, all I am able to do is select the original face and not the reflected one.

Is there a way to get around this problem ?

Thanks, Vivek

  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cannot convert fluent or tgrid hexcore mesh aerogt3 OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 2 October 22, 2010 11:55
CFX Pre - TGrid Vivek Vasudevan CFX 2 March 20, 2007 07:31
Reflect in TGrid Vivek Vasudevan Main CFD Forum 0 March 16, 2007 09:58
TGrid: segmentation violation error Vincent FLUENT 0 February 15, 2006 11:34
Gambit periodic boundaries vs TGrid AnnaG FLUENT 0 June 20, 2002 16:16


All times are GMT -4. The time now is 08:35.