autosave dat.file at flow times -w.adapt.time step

January 11, 2008, 10:32

Dear All,

I have a simple question about "autosave dat. files" for transient simulations which also use "adaptive time stepping". I would like to save my unsteady simulation every one second of flow-time. When I use fixed time-step, it is easy. But when time-step is also changing during simulation, I couldn't manage. Thank you for your help.

Regards,

January 11, 2008, 19:30

Define a macro for saving your variables, then you could let Fluent to run the macro at every time step.

January 11, 2008, 10:32	autosave dat.file at flow times -w.adapt.time step	#1
jsn Guest Posts: n/a	Dear All, I have a simple question about "autosave dat. files" for transient simulations which also use "adaptive time stepping". I would like to save my unsteady simulation every one second of flow-time. When I use fixed time-step, it is easy. But when time-step is also changing during simulation, I couldn't manage. Thank you for your help. Regards,

January 11, 2008, 19:30	Re: autosave dat.file at flow times -w.adapt.time	#2
cfd_newbie Guest Posts: n/a	Define a macro for saving your variables, then you could let Fluent to run the macro at every time step.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
incompressible flow Flow on a step-down (backward-facing step).	alikami	Main CFD Forum	3	November 16, 2017 12:57
Anyone has step by step guide from geometry to simulating air flow in room	binghong	ANSYS	0	September 30, 2010 23:50
Pulsatile Flow , time step size	Pavelko	CFX	3	August 31, 2010 18:23
autosave at flow time with adaptive time stepping	Ybes	FLUENT	0	November 3, 2007 12:32
Flow visualization vs. Calculated flow patterns	Francisco Saldarriaga	Main CFD Forum	1	August 2, 1999 23:18