CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

Create a layer of cell above ground of 1m tall

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 11, 2008, 00:34
Default Create a layer of cell above ground of 1m tall
  #1
sammi
Guest
 
Posts: n/a
Dear Sir/Madam,

I am using Gambit to form the mesh. I would like to simulate the effect of flow at pedestrian level (about 2m above ground) in a 3D model, therefore, I need to create 2 fine layers of cell (each of height 1m) above the ground of area of interest. I don't know how to do this. I have tried the "Mesh=>Boundary Layer" in Gambit, but it only create the fine mesh on the faces of buildings, it is not for a whole layer of cells above ground. Would anyone please help me....

Regards, Sammi
  Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
how to create boundary layer in icem cfd? jayesh CFX 3 November 24, 2005 10:00
First cell height - boundary layer Vincent FLUENT 2 May 20, 2005 14:54
CHT cell layer thickness problem Arnab CD-adapco 1 March 13, 2005 09:36
How to create a Cell Zone Bikash FLUENT 4 October 26, 2003 16:04
cell layer (de)activation Jochen Trenner CD-adapco 5 November 3, 2000 16:28


All times are GMT -4. The time now is 06:33.