export ascii file with fluent

November 5, 2008, 16:14

I am running simulation on fluent 6.3.26 and I would like to export ascii file. I know that to export ascii file, we have to use the command
:file
:export and then select ascii format

The problem is that the ascii format is inactivated, and I don't understand why. Does someone have an idea why, and how to activate this option.

thanks

November 25, 2008, 09:01

Are you running this in parallel mode? If I run on a single node I can write to ascii. good luck

December 4, 2008, 12:12

I am having this same problem - and it appears when i open a case on one node or multiple. The data I am reading was computed in parallel mode. Would this make a difference? I am trying to export data through the following command sequence: file export

but there is no ascii option avaiable. In the GUI it is greyed out.

peter_and_pan · August 2, 2012, 09:52

Hi,

It's not possible to export your data in ascii if you've computed in parallel mode.

http://hpce.iitm.ac.in/website/Manuals/Fluent_6.3/fluent6.3/help/html/ug/node117.htm

When using the parallel version of FLUENT, you can export only the following packages:
ABAQUS
ANSYS Input
CGNS
EnSight Case Gold
Fieldview Unstructured
I-deas Universal
NASTRAN
PATRAN
Tecplot

November 5, 2008, 16:14	export ascii file with fluent	#1
Clementine Guest Posts: n/a	I am running simulation on fluent 6.3.26 and I would like to export ascii file. I know that to export ascii file, we have to use the command :file :export and then select ascii format The problem is that the ascii format is inactivated, and I don't understand why. Does someone have an idea why, and how to activate this option. thanks

November 25, 2008, 09:01	Re: export ascii file with fluent	#2
Florian Guest Posts: n/a	Are you running this in parallel mode? If I run on a single node I can write to ascii. good luck

December 4, 2008, 12:12	Re: export ascii file with fluent	#3
Autumn Fjeld Guest Posts: n/a	I am having this same problem - and it appears when i open a case on one node or multiple. The data I am reading was computed in parallel mode. Would this make a difference? I am trying to export data through the following command sequence: file export but there is no ascii option avaiable. In the GUI it is greyed out.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[CAD formats] Blender export script for named ASCII STLbs	andersking	OpenFOAM Meshing & Mesh Conversion	26	April 22, 2023 16:46
Automatic Data Export (ascii format)	A Kourm	FLUENT	4	March 7, 2021 14:08
PLOT3D ASCII solution file to MATLAB data file	Sandeep Rana	Main CFD Forum	4	June 11, 2010 09:48
how to export mesh file to Fluent	sachin	CFX	4	May 14, 2007 08:31
Is there any way to quickly export ascii file?	HVAC	FLUENT	0	December 29, 2005 20:24

August 2, 2012, 09:52		#4
peter_and_pan New Member Pierre LAURET Join Date: Sep 2011 Location: France Posts: 5 Rep Power: 14	Hi, It's not possible to export your data in ascii if you've computed in parallel mode. http://hpce.iitm.ac.in/website/Manuals/Fluent_6.3/fluent6.3/help/html/ug/node117.htm When using the parallel version of FLUENT, you can export only the following packages: ABAQUS ANSYS Input CGNS EnSight Case Gold Fieldview Unstructured I-deas Universal NASTRAN PATRAN Tecplot