CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Fluent Iteration Message

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   January 9, 2009, 09:41
Default Fluent Iteration Message
Vincent Ryan
Posts: n/a
i have tested my model in fluent for mach 3. during iteration i am getting the following message

time step reduced in 1 cells

absolute pressure limited to 1.000000e+000 in 1 cells on zone 2

temperature limited to 1.000000e+000 in 1 cells on zone 2

498 4.2109e+00 5.8174e+00 8.0336e+00 4.9135e+00 0:00:00 2

after iteration when i displayed contours for velocity i am getting the min mach no = 0.5485412 and max mach no = 36.60972

and for contours vectors i am getting the min mach no = 0.1598175 and max mach no = 68.7286

can any one explain for the change in Mach Number and the message displayed during iteration.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
to reset iteration number in FLUENT Mohan R FLUENT 3 June 18, 2014 01:16
Iteration outside of the fluent loop Jey Shin FLUENT 0 June 11, 2007 01:49
about error message in fluent Devy FLUENT 3 August 1, 2001 05:10
Fluent Message Flav FLUENT 0 March 9, 2001 05:13
Iteration Number in Fluent 5 Alfonso Ferrandez FLUENT 7 March 7, 2000 10:55

All times are GMT -4. The time now is 06:01.