|
[Sponsors] |
January 22, 2009, 04:38 |
case check doubt
|
#1 |
Guest
Posts: n/a
|
Hi, hi modeling a stirred tank with rushton turbine. I' using sliding mesh, and I turned to it via the mrf-to-sliding-mesh TUI command.
I've got an inner moving cylindrical zone surrounding the impeller and another outer stationary zone. I've set the impeller stationary relative to the adiacent cell zone, the tank wall stationary, the shaft coming out of the moving zone rotating with an absolute speed equal to the moving zone, and the outer cell zone stationary, obviously. When I run the case check I get this reccomandation: "Review wall motion. Stationary wall motion relative to adjacent zone detected (Define/Boundary Conditions)" I don't quite get it. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Check my case | ivanyao | OpenFOAM Running, Solving & CFD | 2 | November 25, 2008 21:49 |
Cloning a case or creating a new case for 16 processes | mellanoxuser | OpenFOAM Running, Solving & CFD | 0 | February 8, 2008 16:52 |
Problem seeing new case in case browser | alan_fergus | OpenFOAM Pre-Processing | 9 | June 22, 2006 03:46 |
Doubt in unsteady case | vijay | FLUENT | 1 | April 24, 2006 11:11 |
Cell check and Boundary check errors | AB | Siemens | 4 | October 28, 2004 13:04 |