CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > FLUENT

help me plz!

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   September 23, 2009, 05:07
Default help me plz!
  #1
New Member
 
Prashant Gupta
Join Date: Sep 2009
Location: IIT Kanpur
Posts: 8
Rep Power: 8
prashant gupta is on a distinguished road
hello, can u tell me that, when i am meshing a curved surface in gambit a new line is coming which is not superimposed on the actual profile, and this new line is meshed, will this create trouble in fluent, (bcoz my solution is not converging, residuals are stabilized) if yes what is the remedy?
prashant gupta is offline   Reply With Quote

Old   September 23, 2009, 05:28
Default
  #2
Senior Member
 
Philipov's Avatar
 
Svetlin Philipov
Join Date: Mar 2009
Location: United Kingdom
Posts: 176
Rep Power: 8
Philipov is on a distinguished road
I suppose this "new" line is the meshed one... Try to use more nodes and maybe you will get close to the desired line...
Philipov is offline   Reply With Quote

Old   September 23, 2009, 05:47
Default
  #3
New Member
 
Prashant Gupta
Join Date: Sep 2009
Location: IIT Kanpur
Posts: 8
Rep Power: 8
prashant gupta is on a distinguished road
ya that line is the meshed one, my profile is a blade profile, it is not possible to get many no of nodes, can u plz tell me that will it create problem in fluent
prashant gupta is offline   Reply With Quote

Old   September 23, 2009, 07:13
Default
  #4
Senior Member
 
Philipov's Avatar
 
Svetlin Philipov
Join Date: Mar 2009
Location: United Kingdom
Posts: 176
Rep Power: 8
Philipov is on a distinguished road
Let's say that this will simplify the geometry of the object...
Philipov is offline   Reply With Quote

Old   September 23, 2009, 07:21
Default
  #5
New Member
 
Prashant Gupta
Join Date: Sep 2009
Location: IIT Kanpur
Posts: 8
Rep Power: 8
prashant gupta is on a distinguished road
ok, i will try that, and there is another thing that is creating problem to me, my solution is not converging, residuals are stabilizing, i had tried almost every solvers, my problem is compressible, pressure in let and pressure outlet, with periodic top and bottom, and blade with no slip, velocity is not so high its around 60 m/s at inlet, and it is a gas turbine, so velocity is increasing at exit(not more that 1.3 mach no.) can u plz suggest me the solver, m using pressure based, steady, implicit, second order every where, simple in pressure velocity coupling, etc,
it will be very grateful if u can!
this is 2-D till now.
prashant gupta is offline   Reply With Quote

Old   September 23, 2009, 07:49
Default
  #6
Senior Member
 
Philipov's Avatar
 
Svetlin Philipov
Join Date: Mar 2009
Location: United Kingdom
Posts: 176
Rep Power: 8
Philipov is on a distinguished road
No experience with turbine modeling...
Philipov is offline   Reply With Quote

Old   September 23, 2009, 08:27
Default
  #7
New Member
 
Prashant Gupta
Join Date: Sep 2009
Location: IIT Kanpur
Posts: 8
Rep Power: 8
prashant gupta is on a distinguished road
no problem, but thanks
prashant gupta is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plz help me "creation IC engine Geometry" khalaf FLUENT 6 April 9, 2012 13:29
plz help its urgent garima chaudhary FLUENT 0 September 25, 2007 05:28
plz help urgent_VOF MODEL garima chaudhary FLUENT 0 September 12, 2007 10:16
plz ......help me out.....************************ krishna FLUENT 2 January 10, 2007 03:53
help plz! problems in filling times : new user shankar FLUENT 0 July 24, 2003 12:58


All times are GMT -4. The time now is 10:52.