CFD Online Logo CFD Online URL
Home > Forums > FLUENT

Using Multiphase

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   October 28, 2009, 13:01
Default Using Multiphase
New Member
Boris Styward
Join Date: Oct 2009
Posts: 6
Rep Power: 7
Styward is on a distinguished road
I have a system, and the system is like this
I have a reservoir which is filled by water with head = 2 or 3 metres, the reservoir is connected to the pipe, and then the pipe is connected to a ventury, and at the end of the pipe, it is directly connected to the atmosphere,
in the ventury , the pressure in the center of the smallest area of the pipe is lower than pressure of the atmosphere, so if we make a hole/connecting pipe that makes it directly connected to the air, so air is moving in to the ventury.
the system can be called a hydro ventury system,
the purpose of my project is to make a proper wind turbine in duct that get the power from this hydro ventury system,
first, i want to simulate the system, to know how fast that the wind blow through the duct that connected to the ventury, and i don't know how to do it with FLUENT, because my friend told me that it have to use a multiphase model, and i don't understand how to use multiphase.
if any of you could help my problem, and told me how to use multiphase and the boundary condition that i must use in the system, it will be a pleasure for me
Thank you!!
Styward is offline   Reply With Quote

Old   October 30, 2009, 09:14
Thumbs up try it
Senior Member
teguhtf's Avatar
teguh hady
Join Date: Aug 2009
Location: Surabaya, Indonesia
Posts: 153
Rep Power: 8
teguhtf is on a distinguished road
You can see it in this web
hope it helps
teguhtf is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference of multicomponent and multiphase homogenous flows Luk_Fiz CFX 11 April 4, 2013 05:29
multiphase multicomponent physics ckleanth CFX 3 June 4, 2009 20:15
low concentration multiphase zwdi FLUENT 4 June 1, 2009 17:10
Multiphase flow modeling Paul CFX 2 August 11, 2003 09:41
Why and where should multiphase be used? Seo, Hyeoncheol Main CFD Forum 2 June 18, 2002 10:52

All times are GMT -4. The time now is 20:12.