|August 5, 2010, 10:09||
CFD of Plasma Spray nozzle
Join Date: Aug 2010
Posts: 1Rep Power: 0
I am modeling the flow of Argon gas in the arc chamber of a Plasma Spray gun, and exiting the nozzle into the atmospher. I am having trouble simulating the proper flow conditions and obtaianing flow velocities. I am using a 2-D, axisymmetric, Density based, steady solver with a k-e RNG turbulence model and EWT.
I have set the entry B.C. as velocity inlet, but cannot seem to set my desired pressure. I know my inlet velocity is 13.4 m/s, but a high pressure at this inlet should give me high velocities at the nozzle exit. I only get around 27m/s at the exit.
If anyone can help in this matter i would appreciate it alot.
|Thread||Thread Starter||Forum||Replies||Last Post|
|CFD THROUGH A NOZZLE OF AN INJECTOR||DR.GH.REZA NAMAVAR||Main CFD Forum||4||October 24, 2001 10:11|
|ASME CFD Symposium, Atlanta, 22-26 July 2001||Chris R. Kleijn||Main CFD Forum||0||August 1, 2000 10:07|
|CFD CODE FOR SPRAY||G.Thibaudeau||Main CFD Forum||4||February 23, 2000 20:27|
|PC vs. Workstation||Tim Franke||Main CFD Forum||5||September 29, 1999 15:01|
|public CFD Code development||Heinz Wilkening||Main CFD Forum||38||March 5, 1999 12:44|